Poliertücher | NW-Serie Polishing pads | NW-series VLIES | NW-SERIE NONWOVEN | NW-SERIES Traditionell wurden in der Vergangenheit Filze als Polierträgermaterial eingesetzt. Die Poliertücher der NW-Serie bestehen heute überwiegend aus synthetischen Fasern, beispielsweise Polyesterfasern, die mit einem Bindemittel, ohne zu verweben verbunden werden. Durch das Bindemittel können die Eigenschaften des Pads bzgl. der Härte und der Wasseraufnahme/-abweisungsfähigkeit eingestellt werden. Teilweise besteht die Möglichkeit die Tücher mit Abrasive, beispielsweise Diamant oder Aluminiumoxid zu imprägnieren. Durch diese Einstellgrößen können die Tücher je nach Anwendung zur Vorpolitur bis zum Finishing eingesetzt werden. Der Einsatzbereich ist für Glas, Kunststoffe, Halbleiter, aber auch für Edelstahl, Nicht- Eisen-Metalle oder Silber sehr groß. Felts were traditionally used as polishing material support in the past. The polishing pads of the NW series are today mainly of synthetic fibers, such as polyester fibers, which are connected with a binder, without interweave. By binding the properties of the pad with respect to the hardness and water absorption / repellency ability can be set. In some cases there is the possibility the pads with abrasive, for example, to impregnate diamond or aluminum oxide. Through this adjustment variables, the pads can be used depending on the application for pre-polishing to finishing. The application range is very large for glass, plastics, semiconductors, but also for stainless steel, non-ferrous metals or silver. NWH525 ABRASIVE • Diamantflüssigkeit 1-25 µ EIGENSCHAFTEN • druckfest • dicht • homogen • Dicke: 0,8 mm • Härte: 94 Shore-A • Dichte: 0,7 g/cm³ ABRASIVES • diamond liquid 1-25 µ CHARACTERISTICS • firm • dense • homogeneous • thickness: 0,8 mm • hardness: 94 Shore-A • density: 0,7 g/cm³ NWH91 ABRASIVE • alle Typen EIGENSCHAFTEN • hohe Dichte • laminiert • perforiert • Dicke: 1,08 mm • Härte: 94 Shore-A • Dichte: 0,95 g/cm³ ABRASIVES • all types CHARACTERISTICS • high density • laminated • perforated • thickness: 1,08 mm • hardness: 94 Shore-A • density: 0,95 g/cm³ r e h c ü t r e i l o P s d a p g n h s i i l o P NWH-GP2 NWH90 ABRASIVE • AlO3, SiO2 oder CeO2 ABRASIVES • AlO3, SiO2 or CeO2 ABRASIVE • Diamantflüssigkeit 1-100 µ ABRASIVES • diamond liquid 1-100 µ EIGENSCHAFTEN • sehr feine, hauptsächlich horizontale Fasern • gute chemische Beständigkeit • erzielt sehr gute Ebenheit • Dicke: 2,8 ±0,2 mm • Härte: 70° ±5 Shore-A • Dichte: 0,46 ±0,04 g/cm³ CHARACTERISTICS • very fine, mainly horizontal fibres • good chemical resistance • achieves very good flatness • thickness: 2,8 ±0,2 mm • hardness: 70° ±5 Shore-A • density: 0,46 ±0,04 g/cm³ EIGENSCHAFTEN • hohe Dichte • laminiert • glatt • Dicke: 1,08 mm • Härte: 90 Shore-A • Dichte: 0,95 g/cm³ CHARACTERISTICS • high density • laminated • smooth • thickness: 1,08 mm • hardness: 90 Shore-A • density: 0,95 g/cm³ www.submikron.com 35